To check a VIN number, first find the 17-character VIN on the vehicle, then enter it into a VIN lookup tool. A free VIN decode, like the one on motorpeek.com, tells you the make, model, year and engine. A full vehicle history report goes further and shows title brands, odometer readings, liens and theft records. For open safety recalls, you can also search the VIN on NHTSA's recall lookup.
Here is where to find the VIN, and which type of check to use for each question you have about a used car.
Step 1: Find the VIN on the Vehicle
Every car sold in the US since 1981 has a 17-character VIN. It never includes the letters I, O or Q. Check these common spots:
- Driver-side dashboard: look through the windshield at the lower corner on the driver's side.
- Driver's door jamb: a sticker on the door frame lists the VIN along with tire pressure and manufacture date.
- Title and registration: the VIN should appear on both documents.
- Insurance card or policy: usually lists the VIN for the insured vehicle.
- Under the hood or in the trunk: some vehicles stamp the VIN on the engine bay firewall or under the spare tire cover.
Always compare the VIN in at least two places on the car. If the dashboard VIN does not match the door jamb sticker or the title, walk away or ask for a clear explanation. Mismatched VINs can point to clerical errors, but also to tampering or a rebuilt vehicle.
Step 2: Choose Where to Check It
Free VIN decode
A free VIN decode reads the information built into the number itself. That typically includes the manufacturer, model year, body style, engine type and the plant where the vehicle was built. It is a good first check to confirm the car matches the seller's listing. For example, if the ad says it is a V6 trim but the decode says four-cylinder, you have caught a problem early. motorpeek.com offers a free VIN decode you can use for this.
NHTSA recall lookup
The National Highway Traffic Safety Administration lets you search a VIN for open safety recalls at no cost. An open recall means a safety defect has been announced but not yet repaired on that vehicle. Dealers generally perform recall repairs for free, but it is smart to know before you buy. Note that recall data only covers recalls, not the car's accident or title history.
Full vehicle history report
A decode will not tell you what happened to the car after it left the factory. For that you need a history report. A full report from motorpeek.com can include:
- NMVTIS title brands: salvage, rebuilt, junk, flood and lemon buyback records reported through the National Motor Vehicle Title Information System.
- Odometer readings: past mileage records that help you spot possible rollback or inconsistent mileage.
- Lien information: whether a lender may still have a financial claim on the vehicle.
- Theft records: whether the vehicle has been reported stolen.
Keep in mind that no report is perfect. Reports only show what has been reported to data sources, so an accident that was never reported or an unrecorded repair may not appear. motorpeek.com is an independent service and is not affiliated with any government agency, Carfax or AutoCheck.
Step 3: Match the Check to Your Situation
- Browsing listings: run a free VIN decode to confirm the specs match the ad.
- Serious about a car: order a full history report before you visit or negotiate.
- Ready to buy: check NHTSA for open recalls and pay for a pre-purchase inspection by an independent mechanic.
- Selling your own car: check what buyers will see so there are no surprises in the negotiation.
Red Flags to Watch For
- A seller who refuses to share the VIN or sends only a partial number.
- A VIN plate that looks scratched, glued, or replaced.
- A decode that does not match the listed make, model, year or engine.
- A brand like salvage or flood on the title record, especially if the seller did not mention it.
- Mileage that drops between records.
Bottom Line
Find the VIN on the dashboard and door jamb, compare it to the title, then run a free VIN decode to confirm the basics. Before paying for a used car, get a full vehicle history report and check NHTSA for open recalls. Combined with an independent inspection, these steps give you a much clearer picture of the car you are about to buy.
Frequently asked questions
Where can I check a VIN number for free?
You can run a free VIN decode on motorpeek.com to see the make, model, year and engine. NHTSA's website also offers a free open recall lookup by VIN. Free tools generally do not show full title, odometer or lien history.
Where do I find the VIN on my car?
The most common spots are the lower corner of the dashboard on the driver's side, visible through the windshield, and the sticker on the driver's door jamb. You can also find it on your title, registration and insurance documents.
Can a VIN check tell me if a car has a salvage title?
A full vehicle history report can show title brands such as salvage, rebuilt, junk, flood and lemon buyback that were reported through NMVTIS. A basic free decode will not. No report catches everything, so also get an independent inspection.